Description
Improve your rifle with this FFT Upgrade Kit. Not only will this kit give your rifle a fresh new look, it will also shave off more than a pound in weight.
FFT Upgrade Kit
$749.99
*Spot bedding of the recoil lug is required and some slight inletting may be necessary for proper install*
*If you plan to Cerakote this stock, it is recommended that you use an air-dry Cerakote*
Features/Specs
- Kit includes: FFT Sporter Stock, FFT Floor Plate, and FFT Bolt Knob
- More than a pound in weight savings
- Extremely strong and durable
FFT Stock
- Weighs just 1 lbs. 1.8 oz (Short action)
- Length of pull 13.5″
- Barrel channel is 1.28″ taper with 1.15″ at the muzzle end
- Stainless Steel pillars
- Single front sling stud & single rear stud
- Recoil pad
- Made for Remington 700 actions only
FFT Floor Plate
- Weight: 0.3 oz
- Raised CHRISTENSEN lettering
FFT Bolt Knob
- Weight: 0.2 oz
- Larger than standard bolt knob
Additional information
| Weight | 4 lbs |
|---|---|
| Color | Carbon/Gray, Carbon/Green and Tan |
| Action | Long, Short |
| Contour | Carbon Barrel, Steel Barrel |
| Configuration | Right Hand, Left Hand |
Customer Reviews
4.7 Based on 9 Reviews
Write a Review Filter Reviews:
LB
01/15/2024
Logan B.
US
DS
12/11/2023
Daniel S.
USFFT Upgrade kit
The FFT Upgrade kit I received was very nice and the were finished nicely and they are amazingly lightweight. When I opened the box it was missing the FFT bolt knob. I sent an email request and kindly explained what was wrong with the order. I received an email apologizing for the missing part and that they had already sent in the order for the new part. I received the new part in a few days. The parts and service from Christensen Arms and Kaitlyn Caldwell from the customer service team are excellent. I will keep buying Christensen Arms products after this excellent experience.
CS
12/05/2023
Charles S.
USMissing pieces
I purchased a FFT upgrade kit and only received the stock , still waiting on plate and bolt knob , 🤷�♂️ incomplete!!
SB
11/22/2023
Scott B.
USMade my Ridgeline Brand New Improved!
As far as the bedding of the recoil lug, it is one of the easiest things you’ll do. I used JB Weld , mixed up a tablespoon full, 3/4 way filled the lug cavity in the new FFT stock and coated the recoil lug and surrounding area with neutral kiwi wax. Assembled the action, tightened then backed off 1/4 turn on each bolt, let it set up overnight, popped it apart ( minimal effort) and then cleaned up the barrel and very few spots on the stock to make it look professional. The next day I test shot my 6.5 Creedmoor and I actually had a one hole group! Not even a cloverleaf. It was a hole inside of a hole! The FFT stock lowered the weight on my rifle substantially and the bottom floor plate was super easy to install as well as the knob on the bolt handle. Considering I bought my Ridgeline years ago for about $1500 the investment made it still less than buying a new FFT Ridgeline. I could not be more happy.
MH
04/07/2023
Michael H.
US
